Need help?Do you have a question about the Hyster N45ZR2 and is the answer not in the manual?
General| Model | N45ZR2 |
|---|---|
| Load Capacity | 4500 lbs |
| Power Source | Electric |
| Lift Height | Up to 240 inches (depending on mast) |
| Mast Type | Multiple options available (2-stage, 3-stage, 4-stage) |
| Rated Capacity | 4500 lbs |
| Load Center | 24 inches |
| Voltage | 36V / 48V (depending on configuration) |
| Battery Voltage | 36V / 48V (depending on configuration) |
Critical safety rules and warnings for performing work near the mast assembly.
Explanation of single-reach and double-reach carriages, their parts, and functionality.
Instructions for removing, installing, and handling the load backrest.
Procedures for fork removal, installation, and replacement with safety guidelines.
Detailed procedure for safely disconnecting and removing the reach carriage assembly.
Guidelines for inspecting rollers, bearings, welds, and chain mounts for wear or damage.
Step-by-step guide for re-mounting the reach carriage assembly onto the mast.
Essential safety warnings and general notes for performing repairs on the reach carriage.
Instructions for removing, cleaning, inspecting, and installing load rollers.
Specific procedures for repairing side rollers on 6.9 mast configurations.
Steps for removing and taking apart the front frame assembly.
Procedures for reassembling the front frame with or without sideshift.
Procedures for removal, disassembly, cleaning, inspection, and assembly of single-reach arms.
Instructions for disassembling double-reach scissor arms.
To Next Page
