Need help?Do you have a question about the Hyster N30XMDR3 and is the answer not in the manual?
Outlines critical safety procedures and warnings for working in proximity to the mast.
Provides step-by-step instructions for the removal and installation of the load backrest.
Details procedures for removing and disassembling the outer frame of the reach assembly.
Step-by-step guide for assembling and installing the reach assembly outer frame.
Provides steps for the removal and disassembly of single-reach scissor arm components.
Instructions for reassembling and installing single-reach scissor arms.
Details the process for removing and disassembling double-reach scissor arm components.
Instructions for reassembling and installing double-reach scissor arms.
Steps for adjusting reach cylinders for correct extension and retraction.
Lists common problems, their causes, and corrective actions for specific reach carriage models.
General| Model | N30XMDR3 |
|---|---|
| Load Capacity | 3000 kg |
| Power Source | Electric |
| Mast Type | 2-Stage Limited Free Lift, 3-Stage Full Free Lift |
| Voltage | 48 V |
| Battery Voltage | 48 V |
| Tire Type | Pneumatic |
| Lift Height | Varies with mast |
| Lift Height (m) | Varies with mast |
| Overall Width | 1200 mm |
| Load Capacity (kg) | 3000 kg |
To Next Page