Installation and Operation
Installing the USB Driver
Step 1 Insert the disk into the optical drive of the computer.
Step 2 Open the “Document” folder in the “UPort 1100” directory and Install this driver according to
Section Driver Installation in the “UPort_1100_Series_Users_Manual_v5” document.
Note
The driver installation is subject to the edition and bit of the operating system. The “X64” folder in the
installation package is applied to the operating system (64-bit), while the “X86” folder in the
installation package is applied to the operating system (32-bit),
Assembling the Gooseneck Microphone
Plug the gooseneck microphone into the jack on the microphone base. See the figure below.
To Next Page
