Hytera PD46 Series - Basic Operations; Turning the Radio On;Off; Adjusting the Volume; Selecting a Zone

7
Basic Operations
Turning the Radio On/Off
Adjusting the Volume
Selecting a Zone
A zone is a group of channels with the same property, which can facilitate
convenient management over the channels. The radio supports 16 zones,
each of which consists of up to 16 channels. You can select a zone
through any of the following ways:
- +
●
Menu Operation: Go to “Menu -> Zone”, press the Up or Down key
to select an appropriate zone, and then press the OK/Menu key to
conrm it.
●
Shortcut key: You can toggle to the appropriate zone by pressing the
programmed Zone Up or Zone Down key preset by your dealer.
If the Zone Notify feature is enabled by your dealer, the radio will
announce the zone number when selecting zone.
Selecting a Channel
After the radio is powered on, you can rotate the Channel Selector Knob
to select an appropriate channel.
If the Channel Notify feature is enabled by your dealer, the radio will
announce the channel number upon channel switching.
Selecting a Zone Selecting a Channel