14
Features and Operations
Backlight
Description
Backlight allows you to set the backlight on and off. Activating the
backlight can illuminate the LCD and the keypad, so as to facilitate your
operation under dim light conditions.
Operation
Go to “Settings -> Radio Set -> Backlight” to enable or disable this
feature. There are three options:
●
Off: The backlight will remain off.
●
On: The backlight will remain on.
●
Timed: The backlight will go out automatically if no operation is
made or no signal is received within the time preset by your dealer.
LED
Description
This feature allows you to set whether to activate the LED indicator. You
can set the LED indication for specic features such as TX, RX, Scan,
Low Battery, and the like.
Operation
Go to “Settings -> Radio Set -> LED” to enable or disable this feature.
Tone
Description
This feature allows you to turn the tone on and off. If it is set to Silent,
the radio will give no tones at all.
Operation
Go to “Menu -> Setting -> Radio Set -> Tone” to enable or disable this
feature.
Covert Mode
Description
When Covert Mode is enabled, the radio will disable any visible or
audible indications set by your dealer, such as the LED indicator,
vibration and tone. This feature is mainly used in special missions.
If an audio accessory is connected to the radio, the
radio will output the voice and alert tones via the audio
accessory when the Covert Mode is enabled.
Operation
●
Go to “Menu -> Setting -> Radio Set -> Covert Mode” to enable or
disable this feature.
●
Press the programmed Covert Mode key to enable or disable this
feature.
Note
To Next Page
Loading...
