Switching Power Supply
5
3. Connecting the battery
.
Connect the battery to the Battery Connector properly: RED pole for
anode and BLACK pole for cathode. Always ensure the polarity is
correct.
Note:
1. Never attempt to connect the battery to the Output
Connector on this product.
2. The third step can be skipped in case of no need to
connect the battery.
Important Instructions
When a fully charged battery runs out quickly, its life may expire and
you should replace it with a new one.
When the battery runs low, disconnect it from the product and charge
it with a dedicated charger.
The maximum charge current is 1A, and it takes 2
～
5 days to fully
charge the battery using this product, subject to the specic battery
capacity.
To Next Page
Loading...