Hytera VM780 - Video Resolution; Photo Resolution; Photo Quality

16
5.8.1 Video Resolution
You can set the resolution for video recording.
Tap
Video resolution
, and select from
480P 30fps
,
720P 30fps
,
720P 60fps
,
1080P 30fps
or
1080P 60fps
.
5.8.2 Photo Resolution
You can set the resolution for photo taking.
Tap
Photo resolution
, and select from
2304x1296
,
3072x1728
or
5328x2997
.
5.8.3 Photo Quality
You can set the image quality.
Tap
Photo quality
, and select from
Low
,
Medium
and
High
.
5.8.4 Pre-record and Post-record
The product is capable of pre- and post-recording to ensure all interactions during an incident are
captured. Pre-recording allows officers to capture a period time of footage prior to an event that led
them to press the record button, while post- recording can add a period time of footage after the
recording is deactivated.
Tap
Pre-recorded settings
or
Delay setting
to enter the respective feature. Then tap
or
following Pre-record or Post-rec to enable or disable the feature.

: The feature is disabled.

: The feature is enabled.

(Optional) You can set the pre- or post-recording time from
10s
,
20s
or
30s
.
5.8.5 Strike Sensitivity
With the strike recording feature enabled, upon detecting certain acceleration of movement of itself, the
BWC automatically starts video recording. You can adjust the strike parameter from the menu.
1. Tap
Strike sensitivity setting
, and enter the configuration page.
2. Tap
or following Strike to enable or disable the feature.
3. (Optional) You can set the strike sensitivity from
Low
,
Medium
or
High
.