Hytera VM780 - Split Time; Night Vision; Silent Mode

17
5.8.6 Watermark
Watermark appears in videos or images.
1. Tap
Watermark
, and enter the configuration page.
2. Tap
or following Watermark to enable or disable the feature.
3. (Optional) After watermark is enabled, you can tap
or following options such as
Custom Watermark, Date and Time, Device ID, User ID and GPS to display or remove respective
watermarks.
5.8.7 Split Time
Split time defines the maximum time length of a single audio or video recording. When the product
starts audio or video recording and reaches the split time, a recording file will be saved automatically
and the
product starts a new timing again, and loops the process.
Tap
Split time setting
and select from
5 min
,
10 min
or
15 min
.
5.8.8 Antibanding
When the product is used under indoor fluorescent lamp, its LCD screen may have flickers during video
recording or take photos with stripes because of the frequency disparity between the light sensor
exposure and the local AC power. To fix the flickers, set the antibanding to
Auto
, and it will adjust
automatically to the environment.
Tap
Antibanding setting
and select from
50 Hz, 60 Hz
or
Auto
.
5.8.9 Night Vision
With this feature enabled, the IR LED will light up when the product is recording video in the dark.
Tap Night vision switch and select from On, Off or Auto.
5.9 Silent Mode
In silent mode, the product gives no alarms or rings; its indicators and screen goes dim to keep the
product concealment.