Hytera VM780 - Page 30

29
Method
Operation
Call Interface
Initiate from the dial
pad
1. Tap
in the home screen to
enter Contacts, and then tap
to open the dial pad.
2. Dial the desired private contact
number, and tap
to
initiate a full-duplex voice private
call.
Initiate from the dial
records
1.
Tap in the home screen to
enter
Contacts
, the dial records
are displayed.
2. Swipe up or down to find the
private contact which you
initiated a full-duplex voice
private call before.
3. Tap the contact and initiate a
full-duplex voice private call.
Ending a Full-duplex Voice Private Call
Tap to end the call.
7.2.2 Half-duplex Voice Private Call
Half-duplex voice private call refers to the call established between two terminals (P-PoC6000 client and
P-PoC6000 client, P-PoC6000 client and SmartOne Dispatch). After the private call is established, only
one party can speak at the same time.
Answering a Half-duplex Voice Private Call
Upon receiving a half-duplex voice private call, you need to tap to answer.
Tap to reject the call.