To Next PageTo Next PageWhat to do if there is no audio signal on my Hyundai Telecom HA-201?
If your Hyundai Telecom Intercom System shows no audio signal despite successful call and communication, ensure that the wiring between the monitor station and the camera station is correctly connected.
Why does my Hyundai Telecom HA-201 Intercom System have a poor picture?
If you're experiencing a poor picture on your Hyundai Telecom Intercom System screen, start by ensuring the outdoor camera lens is clean and free from any obstructions, such as the transparent tape attached after installation. Also, be aware that very bright direct sunlight from the sun or artificial light can affect the camera lens. Additionally, after rain or when outside temperatures are very low, the camera lens may temporarily fog over, causing a blurry image. This is normal and operation will be restored when the moisture evaporates.
How to fix a totally dead Hyundai Telecom HA-201 Intercom System?
If your Hyundai Telecom Intercom System unit is completely dead (Power Lamp OFF), first, check that the power cord is properly inserted in the AC outlet and that power is being supplied. Then, ensure the power ON/OFF switch is in the ON position.
General| Brand | Hyundai Telecom |
|---|---|
| Model | HA-201 |
| Category | Intercom System |
| Language | English |
Essential safety measures to prevent electric shock and injury from the device.
Details on regulatory compliance for digital devices and interference prevention.
Covers reading instructions, cleaning, attachments, and safe usage.
Addresses proper installation, ventilation, power, and environmental factors.
Guidelines for servicing, replacement parts, and damage requiring attention.
Description of the handset, speaker, buttons, and screen of the monitor.
Description of the front panel, lens, and other parts of the camera.
Step-by-step instructions for mounting the indoor monitor unit to the wall.
Instructions for installing the outdoor camera unit, including flush mounting.
Visual representations of different system wiring setups.
Guidelines on wire type, length, and proper wiring connection.
Explanation of how to use buttons for volume, time, and screen adjustments.
Process for answering calls, speaking, and terminating conversations.
How to view camera feeds, switch cameras, and operate the door release.
Technical details for the HCB-300/HCC-300 camera.
