How to fix hydraulic oil leakage in Hyundai Forklifts?
Hydraulic oil leakage in Hyundai Forklifts can occur due to several reasons: a failed oil seal (replace the oil seal), slight damage or wear on components (replace the damaged components), or a loose connection (re-tighten the connection).
Why is the charger unable to charge my Hyundai Forklifts?
If the charger is unable to charge your Hyundai Forklifts, the cause may be a damaged charger. Replace the charger to resolve the issue.
What to do if the motor of my Hyundai 15 EP is unable to operate?
If the motor of your Hyundai Forklifts won't operate, there could be several reasons: 1. The power supply switch might not be turned on (insert the key and turn on the power supply). 2. The battery may be completely discharged (examine the stroke switch on the lever if it is pressed because of collision and if the braking switch has been reset). 3. The brake may not be released (replace the fuse). 4. The fuse might be burnt (replace the fuse).
Why my Hyundai 15 EP fork does not rise?
If the fork on your Hyundai Forklifts isn't rising, it could be due to: hydraulic oil with too great viscosity or not injected at all (replace hydraulic oil); foreign matter in the oil (remove the foreign matter or replace the hydraulic oil); or an abnormal unloading device. For the unloading device, please see section 3.2 for re-adjusting.
What to do if the fork declines immediately after rising and the lever springs back greatly on Hyundai 15 EP Forklifts?
If, when rocking the lever, the fork declines as soon as it rises and the lever springs back greatly on your Hyundai Forklifts, the valve might be stuck by foreign matter. To resolve this, open the valve, take it out, clean the internals, and then reinstall them.
General| Model | 15EP |
|---|---|
| Power source | Electric |
| Load Capacity | 1500 kg |
| Battery Voltage | 48 V |
| Category | Forklifts |
| Lift Height | 3000 mm |
| Wheel Type | Solid |
To Next Page
