1-3
Immediately remove any oil or grease on the
floor of the operator's compartment, or on the
handrail. It is very dangerous if someone
slips while on the machine.
·
When working with others, choose a group
leader and work according to his instructions.
Do not perform any maintenance beyond the
agreed work.
·
Unless you have special instructions to the
contrary, maintenance should always be
carried out with the engine stopped. If
maintenance is carried out with the engine
running, there must be two men present : one
sitting in the operator's seat and the other one
performing the maintenance. In such a case,
never touch any moving part.
·
Always remember that the hydraulic oil circuit
is under pressure. When feeding or draining
the oil or carrying out inspection and
maintenance, release the pressure first.
·
D35ASF09
D35ASF10
D35ASF11
To Next Page
Loading...
Need help?
General
