4-25
Item Description Service action
Start engine.
Fasten seat belt.
Release parking brake and put
transmission in 2nd gear forward.
Drive machine at 8
km
/
hr
and
switch parking brake ON.
LOOK/FEEL : Machine must
come to a stop within 2 meters(6
feet) when parking brake is
engaged at 8
km/hr
.
Transmission must shift to neutral.
Turn parking brake to ON.
Place transmission in 1st forward.
Slowly increase engine speed to
high idle.
LOOK : Machine must not move.
OK
Check completed.
NOT OK
Inspect parking brake. Go
to group 3.
OK
Check completed.
NOT OK
Go to transmission control
circuit in section 3.
Parking brake capacity
check
Seat belt must be worn
while doing this check to
prevent possible injury
when machine stops
suddenly.
Parking brake
transmission lockout
check
Engine running.
OFF
ON
P
OFF
ON
P
※
Hydraulic oil must be at operating temperature for these checks.
Hydraulic oil must be at operating temperature for these checks.
To Next Page
Loading...
Need help?
General
