429
Features of your vehicle
Opening the hood
1.Pull the release lever to unlatch the
hood. The hood should pop open
slightly.
2.Go to the front of the vehicle, raise the
hood slightly, pull the secondary latch
(1) inside of the hood center and lift the
hood (2).
3.Pull out the support rod from the
engine room.
4.Hold the hood open with the support
rod.
HOOD
OMD040021
OMD040022N OMD040023
WARNING - Hot parts
Grasp the support rod in the area
wrapped in rubber. The rubber will
help prevent you from being burned
by hot metal when the engine is
hot.
WARNING
Open the hood after turning off the
engine on a flat surface, shifting
the shift lever to the P(Park) posi-
tion for automatic transaxle and to
the 1st(First) gear or R(Reverse) for
manual transaxle, and setting the
parking brake.
To Next Page
Loading...
Need help?
General
