Bucket-in (roll back) operation takes priority over the boom-up (raise) operation in case of using
both operations at the same time.
• Set the bucket priority function ON/OFF.
Auxiliary attachment max flow level mode (option)
• If the machine is equipped with auxiliary attachment, auxiliary attachment flow can be easily adjus-
ted and controlled.
• Set the oil flow level from 0 to 15 level by using +/- button.
Soft end stop mode (option)
• This function gives shock free operation by reducing the speed of attachment near the end stroke.
• Set the soft end stop function ON/OFF.
Speedometer frequency setting mode
• Press the speedometer setting bar (or ) for 3 seconds.
Only for the service person. Do not adjust arbitrary.
Using button
- To change the pulse value, press or .
- To change the position, press .
3-27
To Next Page
Loading...
