6.8. Hedge trimmer and pruner.
This product Is equipped with extremely sharp blades, and when used
Improperly these blades can be extremely dangerous and Improper
handling can cause accidents, which may in turn lead to serious injury or
death. For this reason, you should always be careful to follow the
following instructions when using your trimmer.
6.8.1. Never hold the trimmer in a way in which the blades are pointed towards
someone else.
6.8.2. Never allow the blades to come into proximity with
6.8.3. your body while the engine of the trimmer is in operation.
6.8.4. Always be sure to turn off the engine before changing the angle of the blades.
removing branches which have become stuck in the blades. or at any other
time when coming into close proximity with the blades. Always wear work
gloves made of leather or some other sturdy material when using the trimmer.
6.8.5. Always place the blade cover provided with the trimmer over the blades when
not in use.
6.8.6. Falling branches may fall onto the face or into the yes, resulting In Injuries,
scratches, and cuts, and for this reason you should always be sure to wear a
helmet and face protector when using this machine.
IMPORTANT The thickness of branches, which may be cut using this trimmer.is
limited to up to approximately 3/16" (5 mm). Never try to cut branches thicker that)
this, as doing so may result in damage to the trimmer.
6.8.7. Adjusting the angle of the cutting blades.
6.8.7.1. STOP the engine.
6.8.7.2. Turn the lever (1) on the trimmer
mechanism anti-clockwise to loosen
head – adjust to working position.
6.8.7.3. To tighten move the lever (2) on the
trimmer in a clockwise direction to lock
trimmer head into working position.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
