www.hyundaipowerproducts.co.uk
29
Operation
Working Direction
We recommend to use your machine as outlined below to achieve optimum results
and to reduce the risk of cutting the mains cable.
!
WARNING! DO NOT WORK TOWARDS THE CABLE.
1. Place the bulk of the mains cable close to the starting point.
2. Move from position 1 to position 2.
3. Turn right and proceed towards position 3.
4. Turn left and move towards position 4.
5. Repeat the above steps as required.
Self Propulsion
The HYSW1600E has an element of self-propelled motion. As the bristles rotate, they
will pull the machine along. The lower the setting on the machine, the more intense
the self-propulsion will be. We recommend to start off the machine always on the
highest setting to familiarise the user with the operations of the machine.
Sweeping Near Walls or Raised Borders
The HYSW1600E, will
leave a 10cm gap to
walls. If turfed area is
surround by walls or
raised borders, there
will be a 10cm border.
It is recommended to
use a Strong Bristle
Garden brush to aerate
the turf in areas the
sweeper can’t reach.
10cm
10cm
To Next Page
Loading...
Need help?
General
