5-46
Driving your vehicle
Smart cruise control switch
CANCEL/O : Cancels cruise control
operation.
CRUISE/ : Turns cruise control
system on or off.
RES+: Resumes or increases cruise
control speed.
SET-: Sets or decreases cruise con-
trol speed.
: Sets vehicle-to-vehicle dis-
tance.
To Adjust the Sensitivity of
Smart Cruise Control
The sensitivity of vehicle speed when
following the front vehicle to maintain
the set distance can be adjusted. Go to
the 'User Settings → Driving Assist →
Smart Cruise Control Response →
Slow/Normal/Fast' on the LCD display.
You may select one of the three stages
you prefer.
(Continued)
• Do not use the Smart Cruise
Control when it may not be
safe to keep the vehicle at a
constant speed:
- When driving in heavy traffic
or when traffic conditions
make it difficult to drive at a
constant speed
- When driving on rainy, icy, or
snow-covered roads
- When driving on a steep
downhill or uphill
- When driving in windy areas
- When driving in parking lots
- When driving near crash
barriers
- When driving on a sharp
curve
- When driving with limited
view (possibly due to bad
weather, such as fog, snow,
rain or sandstorm)
- When the vehicle sensing
ability decreases due to
vehicle modification result-
ing level difference of the
vehicle's front and rear
OLF056441L
OLF057601
OLF057602
■ Type A
■ Type B
To Next Page
Loading...
Need help?
General
