i-PRO WV-S22500-F3LSeries User Manual

i-PRO WV-S22500-F3LSeries

121 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

New functions and addendum

・This document contains descriptions of how to set the new functions and their restrictions.

Refer also to the Operating Instructions of this product.

・Depending on the model used, the screens shown in the explanations may differ to the

actual camera screens.

・This document is for the following models.

Notation Model

SC384BSSeriesS

WV-S1136, WV-S1536L, WV-S1536LN, WV-S1536LN-B, WV-S1536L-B, WV-S1536LNS,

WV-S1536LTN, WV-S2136, WV-S2136-B, WV-S2136G, WV-S2136G-B, WV-S2136L,

WV-S2136L-B, WV-S2136LG, WV-S2136LG-B, WV-S2236L, WV-S2236L-B,

WV-S2236LG, WV-S2236LG-B, WV-S2536L, WV-S2536LG, WV-S2536LGN,

WV-S2536LN, WV-S2536LTN, WV-S1536LT, WV-S2536LT,

WV-S1136A, WV-S1536LA, WV-S1536LNA, WV-S1536LNA-B, WV-S1536LA-B,

WV-S1536LNSA, WV-S1536LTNA, WV-S2136A, WV-S2136A-B, WV-S2136GA,

WV-S2136GA-B, WV-S2136LA, WV-S2136LA-B, WV-S2136LGA, WV-S2136LGA-B,

WV-S2236LA, WV-S2236LA-B, WV-S2236LGA, WV-S2236LGA-B, WV-S2536LA,

WV-S2536LGA, WV-S2536LGNA, WV-S2536LNA, WV-S2536LTNA, WV-S1536LTA,

WV-S2536LTA

SC384BSSeriesH

WV-S15700-V2L Series, WV-S15500-V3L Series, WV-S22600-V2L Series,

WV-S25700-V2L Series, WV-S25500-V3L Series, WV-S25500-V3L Series,

WV-S15500-F3L Series, WV-S22500-F3LSeries, WV-S25500-F3L Series,

WV-S15600-V2L Series, WV-S22700-V2L Series, WV-S22500-V3L Series,

WV-S25600-V2L Series, WV-S15500-F6L Series, WV-S22500-F6L Series,

WV-S25500-F6L Series

fisheye

WV-S4156, WV-S4176, WV-S4556L, WV-S4556LM, WV-S4576L, WV-S4576LM,

WV-S4156A, WV-S4176A, WV-S4556LA, WV-S4556LMA, WV-S4576LA, WV-S4576LMA

Multi

WV-S8543, WV-S8543G, WV-S8543L, WV-S8543LG, WV-S8543LN, WV-S8543N

WV-S8544, WV-S8544G, WV-S8544L, WV-S8544LG, WV-S8544LN, WV-S8544N,

WV-S8563L, WV-S8563LG,WV-S8563LN,WV-S8564L,WV-S8564LG,WV-S8564LN,

WV-S8573L, WV-S8573LG, WV-S8573LN, WV-S8574L, WV-S8574LG, WV-S8574LN

miniAI

WV-S71300-F3, WV-S71300A-F3

PTZ S

WV-S65340-Z4K, WV-S65340-Z4N, WV-S61302-Z4, WV-S65340-Z2K, WV-S65340-Z2N,

WV-S61301-Z2, WV-S65340-Z 4 G, W V-S65340-Z 2G, W V-S61301-Z1, WV-S61300-Z Y,

WV-S61300-ZY G, W V-S61501-Z1, WV-S65302-Z2, WV-S65302-Z2 G, W V-S65302-Z2-1,

WV-S65301-Z1, WV-S65301-Z 1 G, W V-S65301-Z1-1, WV-S65301-Z1S, WV-S65300-Z Y,

WV-S65300-ZY G, W V-S65501-Z1, WV-S65501-Z1G

PTZ U

WV-U65302-Z2, WV-U65302-Z2 G, W V-U61301-Z2, WV-U65301-Z1, WV-U65301-Z 1 G,

WV-U61301-Z1, WV-U65300-Z Y, W V-U65300-Z Y G, W V-U61300-ZY, W V-U61300-ZYG

Table of Contents

Questions and Answers:

L
Linda CummingsAug 9, 2025
Why is my i-PRO WV-S22500-F3LSeries Security Camera not turning on?
- K
  Kelly JacksonAug 10, 2025
  If your i-PRO Security Camera isn't powering on, there are several things to check: * **PoE connection:** Ensure the connection is properly established if you're using a PoE (Power over Ethernet) device. If the demanded power exceeds the PoE device's limit, refer to its operating instructions. * **DC power:** If you're using a DC power supply, make sure the power plug is firmly connected. * **AC adapter:** Verify that the AC adapter you're using meets the specifications for the camera.
K
Krista KhanAug 14, 2025
How to fix audio input noise on i-PRO Security Camera?
- S
  susanestradaAug 14, 2025
  If you're experiencing noise in the audio input of your i-PRO Security Camera, consider the following: * **Grounding:** Check the grounding of the camera, switching hub, and any peripheral devices. * **Electrical interference:** Ensure the camera is not too close to an electrical power line or devices that produce strong magnetic fields or radio waves, such as TV/radio antennas, air conditioning motors, or transformers. * **Microphone:** Try using a powered microphone or connecting an audio output with low output impedance.
A
Alex SawyerAug 19, 2025
What to do if LINK indicator doesn't light on i-PRO WV-S22500-F3LSeries Security Camera?
- S
  scottmatthewAug 19, 2025
  If the LINK indicator on your i-PRO Security Camera doesn't light up orange when the Ethernet cable is connected: * **Ethernet cable connection:** Ensure the Ethernet cable is properly connected. * **Hub/Router:** Verify that the hub or router connected to the camera is operating correctly. * **Broken cable:** Replace the Ethernet cable with a new one to rule out a faulty cable.
A
Ann WardAug 25, 2025
How to fix auto focus on i-PRO Security Camera?
- C
  Connie SantiagoAug 25, 2025
  If the auto focus on your i-PRO Security Camera isn't adjusting automatically, you should manually adjust the focus from the software screen in these situations: * When the subject moves a lot * When there are large changes to the lighting intensity * When the light level is low * When the subject or location is extremely bright or reflective * When viewing through windows * When the front panel is in a location where it can easily become dirty * Locations where there is not much contrast such as a white wall * When there is harsh flickering
A
Andrew AllenAug 29, 2025
What does it mean when SD card indicator is red on i-PRO Security Camera?
- M
  Megan CollinsAug 30, 2025
  If the SD memory card warning/error indicator on your i-PRO Security Camera is red, it indicates a read/write error on the microSD card. Replace the card with a normal one.
M
mary87Sep 3, 2025
Why is SD MOUNT indicator off on i-PRO WV-S22500-F3LSeries?
- Z
  Zachary LeachSep 3, 2025
  If the SD MOUNT indicator on your i-PRO Security Camera doesn't light up even when a microSD memory card is installed, it might be because the microSD memory card was formatted on a PC. Use a microSD memory card formatted on the camera or install the software to format the microSD memory card on the PC.

i-PRO WV-S22500-F3LSeries Specifications

General

Maximum Resolution	1920 x 1080
Lens Type	Fixed
IR LED	Yes
Video Compression	H.265, H.264, MJPEG
Ingress Protection	IP66
Vandal Resistance	IK10
Image Sensor	1/2.8" CMOS
Effective Pixels	Approx. 2.1MP
IR LED Distance	30 m
Frame Rate	30 fps
Audio Compression	G.726, AAC
Ethernet	10BASE-T/100BASE-TX
Protocols	IPv4, IPv6, HTTP, HTTPS, SMTP, DNS, DDNS, RTP, RTSP, DHCP, NTP, SNMP
Security	IEEE 802.1X, User authentication
Edge Storage	MicroSD/SDHC/SDXC
Power Source	PoE (IEEE 802.3af)
Day/Night	Yes
WDR	Yes
Network Interface	RJ45

Summary

Firmware Ver.1.20 Updates

Add to system log when recording stream fails to write

Logs errors in the write process of the recording stream to the SD memory card.

Notify user of recording stream write failures with unique alarm

Provides a unique alarm notification for recording stream writing failures.

Note when bit rate exceeds recommended value

Firmware Ver.1.31 Updates

AI-VMD and AI People Detection pre-installed

Changes AI-VMD and AI Privacy Guard to AI-VMD and AI People Detection.

RAM capacity expansion mode

Adds RAM capacity expansion mode to increase available RAM for Ext. software.

Add LLDP function

Firmware Ver.1.40 Updates

SFTP periodic image transmission error to SD card Save trigger

Adds 'SFTP periodic image transmission error' to 'Save trigger' of SD memory card.

Link SFTP settings in Camera action on alarm

SFTP image transmission function

SFTP periodic image transmission to Schedule mode

NTP test function

TLS settings to HTTPS

MQTT function

Firmware Ver.1.41 Updates

Add Genetec Stratocast Service

Adds settings for connecting to Genetec Stratocast cloud-based video monitoring.

Firmware Ver.2.10 Updates

Changed GUI (Graphical User Interface)

AI-VMD alarm area info on TCP alarm notification

Firmware Ver.2.20 Updates

Add FTP to file transfer protocol

Adds FTP support to the communication protocol for file transfer functions.

SFTP periodic image transmission to Easy Setup Event operation

Adds SFTP periodic image transmission to 'Event operation' in Easy Setup.

Change SFTP error to FTP/SFTP error in SD card Save trigger

Renames 'SFTP error' to 'FTP/SFTP error' in SD card 'Save trigger'.

Change SFTP setup to FTP/SFTP setup in Camera action

Add FTP access to camera in Network setup Common

Change SFTP periodic image transmission to FTP/SFTP in Schedule mode

Add Ext. software function

Add Ext. software mode

Firmware Ver.2.30 Updates

Add 2fps/3fps refresh, 1920x1080 pre-alarm, 2 image destinations

Enhances FTP/SFTP refresh interval, pre-alarm resolution, and image destination.

Add 0.5s-4s to alarm deactivation time

Adds new options (0.5s, 1s, 2s, 3s, 4s) to the alarm deactivation time setting.

Add schedule setting for sunrise/sunset image quality

Allows image quality switching based on sunrise and sunset times via schedules.

Add enable/disable setting to SNMP agent

Add corridor view mode to image capture

Adds 'Corridor' and 'Fisheye + Corridor' modes to image capture options.

Add 1280x720 capture size for Stream (1)/(2)

Firmware Ver.2.40 Updates

Fix frame rate not halved with GOP control 'Advanced'

Fixes frame rate halving issue with Advanced GOP control setting.

Change default preset sequence to 'All enabled'

Change default auto track data in video stream to 'On (live display)'

Related product manuals

Preview: i-PRO WV-S2536LN

i-PRO WV-S2536LN

Preview: i-PRO WV-S1536LN

i-PRO WV-S1536LN

Preview: i-PRO WV-S85402-V2L

i-PRO WV-S85402-V2L

Preview: i-PRO WV-S35302-F2LG

i-PRO WV-S35302-F2LG

Preview: i-PRO WV-U85402-V2L

i-PRO WV-U85402-V2L

Preview: i-PRO WV-X86531-Z2-PTZ

i-PRO WV-X86531-Z2-PTZ