EasyManua.ls Logo

i-PRO WV-S1536LN - User Manual

i-PRO WV-S1536LN
121 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
New functions and addendum
・This document contains descriptions of how to set the new functions and their restrictions.
Refer also to the Operating Instructions of this product.
・Depending on the model used, the screens shown in the explanations may differ to the
actual camera screens.
・This document is for the following models.
Notation Model
SC384BSSeriesS
WV-S1136, WV-S1536L, WV-S1536LN, WV-S1536LN-B, WV-S1536L-B, WV-S1536LNS,
WV-S1536LTN, WV-S2136, WV-S2136-B, WV-S2136G, WV-S2136G-B, WV-S2136L,
WV-S2136L-B, WV-S2136LG, WV-S2136LG-B, WV-S2236L, WV-S2236L-B,
WV-S2236LG, WV-S2236LG-B, WV-S2536L, WV-S2536LG, WV-S2536LGN,
WV-S2536LN, WV-S2536LTN, WV-S1536LT, WV-S2536LT,
WV-S1136A, WV-S1536LA, WV-S1536LNA, WV-S1536LNA-B, WV-S1536LA-B,
WV-S1536LNSA, WV-S1536LTNA, WV-S2136A, WV-S2136A-B, WV-S2136GA,
WV-S2136GA-B, WV-S2136LA, WV-S2136LA-B, WV-S2136LGA, WV-S2136LGA-B,
WV-S2236LA, WV-S2236LA-B, WV-S2236LGA, WV-S2236LGA-B, WV-S2536LA,
WV-S2536LGA, WV-S2536LGNA, WV-S2536LNA, WV-S2536LTNA, WV-S1536LTA,
WV-S2536LTA
SC384BSSeriesH
WV-S15700-V2L Series, WV-S15500-V3L Series, WV-S22600-V2L Series,
WV-S25700-V2L Series, WV-S25500-V3L Series, WV-S25500-V3L Series,
WV-S15500-F3L Series, WV-S22500-F3LSeries, WV-S25500-F3L Series,
WV-S15600-V2L Series, WV-S22700-V2L Series, WV-S22500-V3L Series,
WV-S25600-V2L Series, WV-S15500-F6L Series, WV-S22500-F6L Series,
WV-S25500-F6L Series
fisheye
WV-S4156, WV-S4176, WV-S4556L, WV-S4556LM, WV-S4576L, WV-S4576LM,
WV-S4156A, WV-S4176A, WV-S4556LA, WV-S4556LMA, WV-S4576LA, WV-S4576LMA
Multi
WV-S8543, WV-S8543G, WV-S8543L, WV-S8543LG, WV-S8543LN, WV-S8543N
WV-S8544, WV-S8544G, WV-S8544L, WV-S8544LG, WV-S8544LN, WV-S8544N,
WV-S8563L, WV-S8563LG,WV-S8563LN,WV-S8564L,WV-S8564LG,WV-S8564LN,
WV-S8573L, WV-S8573LG, WV-S8573LN, WV-S8574L, WV-S8574LG, WV-S8574LN
miniAI
WV-S71300-F3, WV-S71300A-F3
PTZ S
WV-S65340-Z4K, WV-S65340-Z4N, WV-S61302-Z4, WV-S65340-Z2K, WV-S65340-Z2N,
WV-S61301-Z2, WV-S65340-Z 4 G, W V-S65340-Z 2G, W V-S61301-Z1, WV-S61300-Z Y,
WV-S61300-ZY G, W V-S61501-Z1, WV-S65302-Z2, WV-S65302-Z2 G, W V-S65302-Z2-1,
WV-S65301-Z1, WV-S65301-Z 1 G, W V-S65301-Z1-1, WV-S65301-Z1S, WV-S65300-Z Y,
WV-S65300-ZY G, W V-S65501-Z1, WV-S65501-Z1G
PTZ U
WV-U65302-Z2, WV-U65302-Z2 G, W V-U61301-Z2, WV-U65301-Z1, WV-U65301-Z 1 G,
WV-U61301-Z1, WV-U65300-Z Y, W V-U65300-Z Y G, W V-U61300-ZY, W V-U61300-ZYG

Table of Contents

Other manuals for i-PRO WV-S1536LN

Preview: Basic Information
Basic Information26 pages

Questions and Answers

  • E
    Eric SimpsonAug 9, 2025
    Why is my i-PRO WV-S1536LN Security Camera not turning on?
    • S
      samanthaflemingAug 9, 2025
      If your i-PRO Security Camera isn't powering on, there are several things to check: * **PoE connection:** Ensure the connection is properly established if you're using a PoE (Power over Ethernet) device. If the demanded power exceeds the PoE device's limit, refer to its operating instructions. * **DC power:** If you're using a DC power supply, make sure the power plug is firmly connected. * **AC adapter:** Verify that the AC adapter you're using meets the specifications for the camera.
  • S
    Shawn BentonAug 14, 2025
    How to fix audio input noise on i-PRO WV-S1536LN?
    • T
      travis05Aug 14, 2025
      If you're experiencing noise in the audio input of your i-PRO Security Camera, consider the following: * **Grounding:** Check the grounding of the camera, switching hub, and any peripheral devices. * **Electrical interference:** Ensure the camera is not too close to an electrical power line or devices that produce strong magnetic fields or radio waves, such as TV/radio antennas, air conditioning motors, or transformers. * **Microphone:** Try using a powered microphone or connecting an audio output with low output impedance.
  • C
    Caleb PhillipsAug 19, 2025
    What to do if LINK indicator doesn't light on i-PRO WV-S1536LN Security Camera?
    • J
      jasminewilliamsAug 19, 2025
      If the LINK indicator on your i-PRO Security Camera doesn't light up orange when the Ethernet cable is connected: * **Ethernet cable connection:** Ensure the Ethernet cable is properly connected. * **Hub/Router:** Verify that the hub or router connected to the camera is operating correctly. * **Broken cable:** Replace the Ethernet cable with a new one to rule out a faulty cable.
  • T
    Taylor CruzAug 25, 2025
    How to fix auto focus on i-PRO Security Camera?
    • R
      Rachel BallardAug 25, 2025
      If the auto focus on your i-PRO Security Camera isn't adjusting automatically, you should manually adjust the focus from the software screen in these situations: * When the subject moves a lot * When there are large changes to the lighting intensity * When the light level is low * When the subject or location is extremely bright or reflective * When viewing through windows * When the front panel is in a location where it can easily become dirty * Locations where there is not much contrast such as a white wall * When there is harsh flickering
  • R
    Ricky PhillipsAug 29, 2025
    What does it mean when SD card indicator is red on i-PRO WV-S1536LN Security Camera?
    • L
      lonniegutierrezAug 29, 2025
      If the SD memory card warning/error indicator on your i-PRO Security Camera is red, it indicates a read/write error on the microSD card. Replace the card with a normal one.
  • M
    mkimSep 3, 2025
    Why is SD MOUNT indicator off on i-PRO WV-S1536LN?
    • S
      Shawn MurphySep 4, 2025
      If the SD MOUNT indicator on your i-PRO Security Camera doesn't light up even when a microSD memory card is installed, it might be because the microSD memory card was formatted on a PC. Use a microSD memory card formatted on the camera or install the software to format the microSD memory card on the PC.

Summary

New Functions and Addendum

System Log for Recording Stream Failures

Enhances system logging by recording stream write failures for better error tracking.

SDK Version Display for Compatibility

Displays SDK version information for extension software compatibility checks.

Extended Authentication Password for Notifications

Increases authentication password length to 128 characters for notification destinations.

AI-VMD and AI People Detection Pre-installed

AI-VMD and AI People Detection are now pre-installed extension software.

RAM Capacity Expansion Mode for Extension Software

Introduces RAM capacity expansion mode to increase available RAM for Ext. software.

LLDP Network Discovery Function

Implements LLDP for network device discovery and interoperability.

Genetec Stratocast Service Integration

Adds settings for connecting to Genetec Stratocast cloud video monitoring service.

New Graphical User Interface (GUI)

Updates the camera's graphical user interface for improved user experience.

NTP Test Function for Time Synchronization

Provides a test function to check NTP server communication and time synchronization.

TLS Settings for HTTPS Connections

Adds TLS 1.1, 1.2, and 1.3 selection items for HTTPS connections.

MQTT Function for Event Notifications

Integrates MQTT for event notifications and alarm monitoring via MQTT server.

FTP Support for File Transfer Protocol

Adds FTP support as a file transfer protocol alongside SFTP.

SFTP Periodic Image Transmission in Easy Setup

Integrates SFTP periodic image transmission into the Easy Setup event action.

Extension Software Management Function

Introduces the [Ext.software] menu for installing and managing extension software.

Alarm Deactivation Time Options

Expands alarm deactivation time options to include 0.5s, 1s, 2s, 3s, and 4s.

Schedule Image Quality for Sunrise;Sunset

Allows image quality adjustment based on sunrise and sunset times via schedule settings.

Corridor View Mode for Image Capture

Introduces corridor view mode for fisheye image distortion correction.

1280 x720 Capture Size for Stream (1) & (2) (4 MP)

Adds 1280x720 resolution option for Stream (1) and Stream (2) on 4MP models.

SD Memory Card File System Format Selection

Adds option to select SD memory card file system format (FAT/ext4).

GOP Control Frame Rate Fix

Corrects frame rate behavior with specific GOP control settings for improved performance.

SNMP Default Setting Changed to Off

Sets SNMP to "Off" by default for improved network security.

Settings Excluded from Setup Data Restoration

Clarifies which settings are excluded from restoration when applying backup data.

i-PRO WV-S1536LN Specifications

General IconGeneral
Brandi-PRO
ModelWV-S1536LN
CategorySecurity Camera
LanguageEnglish

Related product manuals