To Next PageTo Next PageHow to troubleshoot power issues with i-PRO WV-S2536LN using PoE?
If your i-PRO Security Camera isn't powering on when using a PoE (Power over Ethernet) device, ensure the connection between the camera and the PoE device is properly established. Also, consult the operating instructions for your specific PoE device for further guidance.
General| Camera Type | Dome |
|---|---|
| Image Sensor | 1/2.8" CMOS |
| Resolution | 1920 x 1080 |
| Lens Type | Fixed |
| Focal Length | 2.8 mm |
| Max Aperture | F1.6 |
| Digital Zoom | 8x |
| Day/Night | Yes |
| WDR | Yes |
| Power Supply | PoE (IEEE 802.3af) |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| IR Distance | Up to 30 m |
| Effective Pixels | 2.1 MP |
| Video Compression | H.264, H.265, MJPEG |
| Frame Rate | 30 fps |
| Network Interface | 10Base-T/100Base-TX, RJ45 |
| Operating Temperature | -30 °C to +60 °C |
Explains the camera's auto-restart function and its causes.
Describes image distortion due to vibration and how to minimize it.
Details the camera's ventilation opening and its role in moisture control.
Explains the "WARMING UP-PLEASE WAIT" message and the subsequent restart procedure.
Specifies the correct method and materials for cleaning the camera lens.
Guides on cleaning the dome cover, including care for the ClearSight coating.
Explains the properties of the ClearSight coating and its potential impact on images.
Details the Ethernet, power, audio, I/O, and monitor output cables and terminals.
Describes the connection and proper usage of the DC power supply and 2P power cables.
Outlines connection details and specifications for audio input and output cables.
Explains the usage and ratings of the EXT I/O and 4P alarm cables.
Describes the function and settings of the MONITOR OUT terminal for adjustments.
Details the INITIAL SET button, LINK, and ACT indicators.
Describes SD (MOUNT) and warning/error indicators, plus the SD ON/OFF button.
Explains the function of the TELE and WIDE buttons for adjusting zoom ratio.
Provides troubleshooting steps for when the camera does not turn on.
Explains why the LINK indicator might not be orange and how to resolve it.
Addresses problems with the SD (MOUNT) indicator and SD card warning/error lights.
Lists potential causes of noise in audio input and suggests solutions.
Explains scenarios where auto focus may fail and how to manually adjust it.
Covers focus after enclosure installation, corner shadows, IR reflection, and double image phenomena.
Covers power, operating/storage environment, and external I/O and audio specifications.
Details waterproof rating, shock/wind resistance, dimensions, mass, and materials.
Explains features like Intelligent Auto, Super Dynamic, gain, and light compensation.
Lists available shutter speeds and color/black & white settings.
Details IR LED, white balance, privacy zones, VIQS, and detection features.
Provides details on zoom ratio, focal length, and maximum aperture ratio.
Specifies focus range, aperture settings, and angular field of view.
Provides DORI distances and allowable angles for pan, tilt, and yaw.
Details the network interface type and connector.
Lists available resolutions and image compression methods (H.265/H.264, MJPEG).
Details the supported frame rates and bit rates per client for various modes.
Explains image quality settings for constant bit rate and VBR.
Covers MJPEG image quality settings and transmission types.
Details audio compression, bandwidth control, protocols, and security features.
Specifies compatible operating systems for the camera's software.
Lists supported web browsers and concurrent access numbers.
Details multi-screen display capabilities and mobile terminal compatibility.
Lists compatible microSD card capacities and compliance requirements.
