i-SENS i-SmartCare 10 User Manual

5. Database
90 i-SmartCare 10 Blood Gas Analyzer
QC Data
Last QC Results Note:

QC – Results screen, Printouts, and Interface messages display their
results in the units selected from Setup - Unit.
1. Select MENU > QC > Last Results .
Note:

The Pending results will be confirmed by Accept and Discard
button.
2. Press and the following functions can be performed.
• Press or to see the previous or next results.
• Press button to print out the results.
• Press to go to the QC - Results List.
• Press button to send results to LIS/HIS.
Note:

When the analyzer is running on a battery and the battery level is
below 80 %, the print function is not available.
3. Press the button to exit to the main screen.

i-SENS i-SmartCare 10 Specifications

General

Brand	i-SENS
Model	i-SmartCare 10
Category	Measuring Instruments
Language	English