i-SENS KetoSens User Manual (English)

Other manuals for i-SENS KetoSens

User Manual50 pages

Manual28 pages

Questions and Answers:

B
Brianna HughesAug 18, 2025
How to fix a blank display on my i-SENS Blood Pressure Monitor?
- F
  floresmaryAug 18, 2025
  If the display of your i-SENS Blood Pressure Monitor is blank even after inserting a test strip, try the following: * Ensure the test strip is inserted correctly, with the contact bars facing upwards and fully inserted into the test strip port. * Verify that you are using the correct test strip. * Check that the batteries are inserted correctly, with the + side facing upwards. * If the issue persists, replace the batteries.
A
Angela NealAug 21, 2025
What to do if the i-SENS KetoSens Blood Pressure Monitor test doesn't start after applying blood?
- J
  Julie YorkAug 21, 2025
  If your i-SENS Blood Pressure Monitor test does not start even after applying the blood sample, ensure the confirmation window is completely filled. If the issue persists, repeat the test using a new test strip.
K
Kenneth WalkerAug 23, 2025
Why am I getting an electronic error on my i-SENS KetoSens?
- J
  Juan LiAug 23, 2025
  If you get an electronic error on your i-SENS Blood Pressure Monitor, try repeating the test with a new test strip. If the error message continues to appear, do not use the meter. Contact your authorised i-SENS sales representative.
J
John DavidsonAug 26, 2025
What to do if the i-SENS Blood Pressure Monitor test result doesn't match how I feel?
- A
  Alyssa BrownAug 26, 2025
  If your i-SENS Blood Pressure Monitor test result doesn't match how you feel, repeat the test using a new test strip. Also, check the expiration date of the test strip and perform a control solution test.
J
Julie KingAug 28, 2025
What to do if the blood sample is not good for i-SENS Blood Pressure Monitor?
- G
  gomezmichaelAug 28, 2025
  If the blood sample used with your i-SENS Blood Pressure Monitor has abnormally high viscosity or insufficient volume, repeat the test after inserting a new test strip.
R
Ronnie MendozaAug 30, 2025
What to do if the i-SENS Personal Care Products display is blank?
- C
  Christopher KellerAug 30, 2025
  If the display is blank even after inserting a test strip, ensure the test strip is inserted with the contact bars facing up and is fully inserted into the test strip port. Verify that you are using the correct test strip and that the batteries are correctly inserted with the + side facing up. If the problem persists, replace the batteries.
N
Nicholas WigginsSep 2, 2025
What to do if i-SENS Personal Care Products test result does not match the way you feel?
- S
  shawngutierrezSep 2, 2025
  If the test result does not match how you feel, repeat the test using a new test strip. Also, check the expiration date of the test strip. You can also perform a control solution test.
J
Jennifer BurkeSep 5, 2025
What to do if an electronic error occurred during the i-SENS Personal Care Products test?
- M
  Melissa PayneSep 5, 2025
  If an electronic error occurs during the test, repeat the test with a new test strip.
R
ramostimothySep 7, 2025
What to do if the i-SENS Personal Care Products test does not start?
- D
  dsmithSep 7, 2025
  If the test does not start even after applying the blood sample to the test strip, check if the confirmation window is completely filled. If not, repeat the test after inserting a new test strip.
J
John GarciaSep 9, 2025
Why i-SENS Measuring Instruments display is blank?
- C
  Crystal PollardSep 9, 2025
  If the display is blank after inserting a test strip, several factors could be at play. First, ensure the test strip is correctly inserted with the contact bars facing upwards and that it's fully inserted into the test strip port. Verify that you're using the appropriate test strip. Also, check the batteries to confirm they are inserted correctly, with the + side facing upwards. If issues persist, try replacing the batteries.