To Next Page
M
Melissa MorganAug 7, 2025
What to do if i-team Scrubber is skidding?
- KKristopher HendricksAug 7, 2025
If your i-team Scrubber is skidding, relocate it to an area with fewer water stains on the floor.
What to do if i-team Scrubber is skidding?
If your i-team Scrubber is skidding, relocate it to an area with fewer water stains on the floor.
Why is my i-team co-botic 45 co-botic offline?
If your i-team Scrubber is offline, follow these steps: 1. Make sure the co-botic is powered on. 2. Check the network connection of your mobile phone. 3. Check the network connection of the co-botic.
Why does my i-team co-botic 45 Scrubber make abnormal sounds?
If the i-team Scrubber is making abnormal sounds, the brush may be entangled or the squeegee might not be installed correctly. First, clean the brush. If the sound continues, reinstall the squeegee.
What to do if i-team co-botic 45 has driving errors?
If you are experiencing driving errors with your i-team Scrubber, it could be due to dirty laser radar or structured light camera. Clean the sensor surfaces with a dust-free cloth. Another cause could be the drive motor triggering an 'over temperature' protection. If this is the case, pause the task and allow the drive motor temperature to cool down.
How to fix i-team co-botic 45 Scrubber that is unable to power on/off?
If you're unable to power your i-team Scrubber on or off, the battery level might be low, or there could be a problem with the power system. Try recharging or replacing the battery.
Introduction to the manual and product.
Cloud-based management system description.
Explains the manual's content and goals.
Identifies intended users of the manual.
Defines who is authorized to operate the machine.
Explains symbols and terms used in the manual.
Details the specific applications for the co-botic 45.
Lists prohibited uses and potential hazards.
Provides information on the expected operational life.
States policy on product design changes and warranty.
Lists technical data and performance metrics of the machine.
Outlines the terms and conditions of the product warranty.
Explains how to find the unique serial number for parts ordering.
Details the components and function of the remote control.
Explains the functions available on the machine's display.
Describes the interface and options of the mobile application.
Provides essential guidelines for safe operation.
Highlights potential hazards encountered during use.
Safety instruction regarding floor conditions after cleaning.
Covers safety considerations when the machine is not in use.
Basic precautions for moving and storing the machine.
Specifies the correct upright position for storage.
Instructions for moving the machine within or between buildings.
Guidelines for safely transporting the machine in a car.
Steps for unpacking the machine and its components.
Procedures for preparing the machine for use.
Instructions for charging the main unit's battery.
Guide on how to properly install the battery.
Steps to charge the remote control's battery.
Pre-operation checks and requirements.
Procedure for adding clean water to the machine.
Initial configuration and power-on steps.
Steps for network connectivity via Wi-Fi or SIM.
Pairing the remote control with the machine.
Instructions for installing the companion mobile application.
How to choose and connect to a specific machine in the app.
Operating the machine manually using the remote control.
Process for generating and saving floor maps for navigation.
Navigating and utilizing the map editing tools.
Updating existing maps or creating new ones.
Adjusting the robot's initial position on a map.
Defining areas like passable, forbidden, or slopes on maps.
Defining cleaning routes and areas within a map.
Manually defining cleaning paths using waypoints.
Scheduling and organizing multiple cleaning plans into tasks.
Initiating scheduled or manual cleaning operations.
Ensuring the robot knows its position before starting a task.
Procedure for safely detaching the battery from the machine.
Maintenance steps for the dirty water system.
Maintaining the cleaning components.
Routine cleaning tasks to be performed daily.
Checks and cleaning tasks for weekly intervals.
Maintenance tasks performed every two weeks.
Checks and tasks to be done monthly.
Instructions for replacing worn squeegee blades.
Guide for replacing the roller brush.
Additional cleaning advice for the machine's exterior.
Information on scheduled professional servicing.
Details on available optional accessories.
Common issues and their solutions.
Specific error prompts and troubleshooting steps.
Procedure for reporting issues through the online platform.
Documentation regarding compliance with European standards.
Technical data and performance metrics of the machine.
Company philosophy and partnership with Made Blue.
General
