SYSTEM REQUIREMENTS
Hardware requirements: laptop / tablet / PC with free USB-C port.
Operation System: Windows 7 / 8 / 8.1 / 10 32/64 bit, Mac OS X, Linux, Android.
Note:
Prior to installing the USB-C, make sure that there are (for the USB-C 3.1 controller in the laptop/PC)
installed the latest drivers for it. In case of outdated USB-C drivers problems during installation or use
may occur.
Installing the USB HUB (USB 3.0 ports type A) is automatic from the system. This HUB will be
automatically detected and installed immediately after connecting to the USB port on your laptop / PC
or PCIe expansion card with internal USB 3.0 host controller.
Before first connecting install the LAN port and then connect to the device. Current drivers are
available on our website www.i-tec-europe.eu in the "Download" section for this product.
PRODUCT OVERVIEW
1. Cable with USB-C connector
2. 3x USB-A 3.0 port
3. RJ-45 port
DRIVER INSTALLATION*
*The driver version is subject to change due to the driver updated.
Note: DO NOT connect the device to your computer before completing the installation of driver!
To Next Page
Loading...
Need help?
General