Need help?Do you have a question about the IAME X30 and is the answer not in the manual?
General| Displacement | 125cc |
|---|---|
| Max RPM | 16, 000 RPM |
| Engine Type | 2-stroke |
| Cooling System | Liquid-cooled |
| Bore | 54mm |
| Stroke | 54.5mm |
| Ignition | Digital |
| Category | Kart Engine |
Guidance on gearbox oil charging, discharging, types, and maintenance intervals for the engine.
Instructions for connecting the cooling system, including thermostat use and winter considerations.
Details on electrical connections for 2016 models, including ignition timing and wiring.
Diagram illustrating electrical connections on the right and left chassis for 2015 models.
Exploded view of the assembly for start/stop kit buttons and key block installation.
Visual representation of the completed installation of the start/stop kit buttons.
Instructions and diagram for mounting the fuel pump bracket onto the engine.
Diagram showing correct routing and connection of fuel feeding pipes to the carburettor.
Guidance on setting the clutch lever for progressive drag and proper disengagement.
Instructions for drilling the muffler to install an exhaust gas temperature probe.
Guidelines for piston replacement based on usage hours and clearance measurements.
Recommended replacement intervals for conrod big end cage, crankpin, and shim.
Recommended replacement intervals for the small end cage.
Recommended replacement intervals for the conrod and ovalization limits.
Basic jetting and settings for the Dellorto carburettor for the X30 Super Shifter 175cc.
Adjusting idle RPM using the throttle stop screw.
Adjusting idle carburetion using idle jet, emulsion tube, and air screw.
Adjusting mid-range carburetion by altering the conical needle position.
Adjusting top RPM carburetion by changing the main jet size.
Proper use of the enrichment system for starting cold or inactive engines to prevent flooding.
Troubleshooting fuel feeding issues related to float chamber, floaters, and fuel valve.
Table of optimized carburettor settings for competitive use based on environmental conditions.
Summary table of key technical data, including fuel mixture, gearbox oil, and spark plug types.
To Next Page
