Issue 1.4
11
4 Safety instructions
4.1 Intended use
The device is an electrical apparatus. It is only allowed to use the device for the following
applications:
Measurement acquisition
Applications with iba products (ibaPDA, and others)
The device must only be used as described in chapter 10 Technical data.
4.2 Special safety instructions
Strictly observe the operating voltage range!
Never supply the device with a voltage other than 24
V DC ±10%!
Excess voltage may destroy the device!
Important note
Do not open the
device! Opening the device will void the warranty!
Important note
Please shutdown the device properly at any time to prevent dataloss. Uncontrolled shut-
downs e.g. by disconnecting the power can lead to dataloss.
Caution!
Make sure that the cooling fins have sufficient ventilation!
Note
Clean the device only on the outside with a dry or slightly damp and statically dis-
charged cloth.
To Next Page
Loading...