IBA ibaDAQ-C - Used Symbols

Manual
ibaDAQ-C
6
Issue 1.4
1.3 Used symbols
If safety instructions or other notes are used in this manual, they mean:
The non
-
observance of this safety information may result in an imminent risk of death
or severe injury:
 By an electric shock!
 Due to the improper handling of software products which are coupled
to input and output procedures with control function!
The non
-
observance of this safety information may result in a potential risk of death or
severe injury!
The non
-
observance of this safety information may result in a potential risk of injury or
material damage!
Note
A note specifies special requirements or actions to be observed.
Important note
Note if some special features must be observed, for example exceptions from the rule.
Tip
Tip or example as a helpful note or insider tip to make the work a little bit easier.
Other documentation
Reference to additional documentation or further reading.