8
Issue 1.4
Connection to several networks
With the two independent 1Gbit/s Ethernet interfaces, ibaDAQ-C can operate in two net-
works and thus enable the separation of IT and process networks. This separation al-
lows, for example, databases and storage systems to be connected to ibaDAQ-C, which
are located in the IT network.
Figure 1: Example of integration in 2 different networks
Communication interfaces included in delivery
Order no. Name Description
31.001042 ibaPDA-Interface-
PLC-Xplorer
Includes the communication interfaces:
- S7-Xplorer (interface to SIMATIC S7)
- AB-Xplorer (interface to Allen-Bradley systems)
- B&R-Xplorer (interface to B&R systems)
- Bachmann-Xplorer (interface to M1 systems)
- Codesys-Xplorer (interface to CODESYS based
systems)
- Logix-Xplorer (interface to ControlLogix systems)
- MELSEC-Xplorer (interface to Mitsubishi
MELSEC systems)
- Sigmatek-Xplorer (interface to SIGMATEK sys-
tems)
- TwinCAT-Xplorer (interface to Beckhoff systems)
31.001112 ibaPDA-Interface-
MQTT
MQTT communication interface
30.670051 ibaPDA-OPC-UA-
Server+
Advanced OPC UA server function
ibaPDA can be used as OPC UA server. This li-
cense allows access to all ibaPDA signals.
30.670180 ibaPDA-Data-Store-
MindSphere-16
Writing to the MindSphere cloud, 16 signals
30.671000 ibaPDA-Data-Store-
MQTT-16
Data-Streaming via MQTT: 16 signals
To Next Page
Loading...
