The Ibanez AEQ-TP2 is a preamp system designed for Ibanez acoustic guitars, providing essential controls for amplified sound and an integrated tuner for convenient tuning. This system is specifically detailed in the "Preamp Information" manual for the AEQ-TP2 model.
Function Description:
The primary function of the AEQ-TP2 preamp is to amplify the signal from an acoustic guitar's pickup, allowing it to be connected to an amplifier or PA system. It offers basic tone shaping capabilities through its Bass and Treble controls, enabling users to adjust the low and high frequencies of their guitar's sound. The Volume control manages the overall output level of the amplified signal.
In addition to its amplification capabilities, the AEQ-TP2 features an integrated tuner, making it a versatile tool for both performance and practice. The tuner is designed for ease of use, providing visual feedback to help guitarists accurately tune their instruments.
Usage Features:
- Volume Control: This knob allows users to adjust the overall gain of the preamp, effectively controlling the loudness of the amplified guitar sound.
- Treble Control: This control enables boosting or cutting of the treble frequencies. Turning the knob clockwise will increase the treble, resulting in a brighter sound, while turning it counter-clockwise will decrease the treble, leading to a warmer or mellower tone.
- Bass Control: Similar to the treble control, the bass knob allows for boosting or cutting of the bass frequencies. Clockwise rotation increases the bass, adding fullness and depth to the sound, while counter-clockwise rotation reduces the bass, making the sound thinner or less boomy.
- Tuner ON/OFF Switch: A dedicated button is provided to alternately turn the tuning meter on and off. This feature ensures that the tuner is only active when needed, conserving battery life. The tuner also has an automatic shut-off function, turning off after 5 minutes of inactivity.
- Note Indicator LED: This set of LEDs (labeled A, B, C, D, E, F, G, and #) visually indicates the note of the string being played. When tuning sharp or flat notes (e.g., G#), both the corresponding note indicator (G) and the '#' indicator will light up. This visual feedback guides the user to tighten or loosen the string until the correct LED for the desired note is illuminated. The manual cautions against overtightening strings to prevent breakage.
- Tuning Guide LED: This feature provides precise tuning feedback. A green LED in the middle lights up when the string is perfectly in tune. If the pitch is flat, a red LED on the left will illuminate, indicating the need to tighten the string. Conversely, if the pitch is sharp, a red LED on the right will light up, signaling that the string needs to be loosened.
Maintenance Features:
The manual provides clear guidelines for battery maintenance, which is crucial for the optimal performance of the AEQ-TP2 preamp and tuner.
- Battery Replacement Indicators: Users are advised to replace the batteries if they observe any of the following issues:
- Decreased sound quality or volume from the amplified signal.
- The tuner not responding when turned on.
- The LEDs on the tuner not operating when the tuner is activated.
- The battery check LED being lit or blinking, which is a direct indicator of low battery power.
- Battery Conservation: To prevent unnecessary battery consumption, it is recommended to disconnect the plug from the output jack when the guitar is not in use. This ensures that the preamp circuit is completely disengaged and not drawing power.
- Battery Disposal: The manual explicitly states that used batteries should be disposed of in accordance with local regulations, emphasizing environmental responsibility.
Important Notes:
- The appearance and specifications of the AEQ-TP2 are subject to change without notice, as is common with electronic products.
- The system is designed for ease of use, with intuitive controls and clear visual feedback for tuning.
- The integrated nature of the preamp and tuner in one unit offers convenience for guitarists, reducing the need for external accessories.
In summary, the Ibanez AEQ-TP2 is a user-friendly and functional preamp system for acoustic guitars, offering essential amplification controls and an accurate, integrated tuner to enhance the playing experience. Its design focuses on practicality and ease of maintenance, ensuring reliable performance for guitarists.
Need help?
To Next Page
General
