9
5-BAND EQ
9 On/off switch
Turns the 5-BAND EQ function on/off� When the 5-BAND EQ is turned on,
blue LEDs on the slider light up�
10
Frequency
Selects the center frequency of each band to be boosted or cut� Regarding
the frequency range of each band, refer to the specification table�
11
Slider
Controls the amount of boost or cut that applied to each frequency band�
Each slider provides boost or cut up to ±10dB�
POST BOOST
12 On/off switch
Turns the POST BOOST function on/off�
13
Indicator
Red LED lights when the POST BOOST is turned on�
14
POST BOOST
Controls the boost level, which is adjustable between 0-11dB�
To Next Page
Loading...
