IBC Technologies Inc.
1-844-432-8422 | www.ibcboiler.com
120-299E3 - August 23, 2023 - Released Document 5 of 5
8.
To check that the controller has the latest software release, go to Status > Boiler Information.
When a software update is performed, the touchscreen controller is put into "service" mode. This prevents the
system from servicing loads.
Start Up
1. Turn on gas to the boiler.
2. Turn on power to the boiler.
3. Check connections for leaks during operation.
4. Reinstall the top service panel to the boiler cabinet.
5. Perform a combustion analysis, and test for proper operation.
6. Reinstall the front cover.
To Previous Page
Loading...
General