IBC Qscan - Serial Commands

Qscan User’s Guide Version 1.4
Page 54
Serial Commands (online mode)
ONLINE COMMANDS
Version Command
V
Returns the rmware identication.
Speaker Command
& xx
Turns the speaker on for xx * 10ms
Led Commands
} xx
Turns the bicolor led on for xx seconds, then leaves it off
{ xx
Turns the bicolor led off for xx seconds, then leaves it on
) xx
Blinks the bicolor led for xx seconds, then leaves it on
( xx
Blinks the bicolor led for xx seconds, then leaves it off
] xx
Turns the green led on for xx seconds, then leaves it off
[ xx
Turns the green led off for xx seconds, then leaves it off
> xx
Blinks the green led for xx seconds, then leaves it on
< xx
Blinks the green led for xx seconds, then leaves it off
Relay Commands
! xx
Turns the relay on for xx seconds
*
Turns the relay off