a. Follow ‘WiFi Setup’ and ‘Method 4’ to access the Web Interface.
b. Here go to ‘Network Setup’ > ‘P2P Settings’
c. Under P2P-1 for:
GUID: (ENTER THE UID EXACTLY AS SHOWN ON THE BASE OF MONITOR OR IN
MY IBCAM)
USERNAME: admin (lower case)
PASSWORD: 000000 (six zeroes)
Click ‘Save’ and then reset the Monitor from the base and then setup the
Monitor from the start. Using a Network Cable connection can help prevent
such errors from repeating easily. See ‘Network Cable Setup’.
5. I hear a clicking sound from the Monitor sometimes
This may be the Night Vision IR-Cut switch activating/deactivating. This can be
observed by having the room dark momentarily and then light again.
Useful Notes
You may record information about your Monitor here for your reference:
GUID (base of Monitor): _____________________________
Monitor App Password: _____________________________
(Default is ‘000000’ six zeroes)
Web Interface Password: _____________________________
(Default is ‘admin’)
Support
You may check in on ibcamsecuripro.com for support updates or contact
ibcam@inteliarm.co.uk if any further help is needed.
Warranty Information:
iBCam Securipro products are carefully designed, manufactured and
tested. Should this product prove faulty within 12 months of purchase
due to materials of manufacturing fault, please return it to the original
place of purchase. Please keep your proof of purchase in a safe place as
this will be required for such purposes.
iBCam Securipro does not accept any liability for damage arising from the
abuse, misuse or negligence.
This guarantee is not transferable and therefore does not apply to second
hand products.
All specifications are subject to change at any time without notice. E&OE.
All trademarks are the property of their respective owners.
Designed & Manufactured by iBCam Electronic (HK) Ltd.
12 13
14 15
To Previous Page
Loading...