ibcam SP6 User Manual

User Guide
SP6
Smart HD WiFi Video Monitor
*Updated version of SP IB820
Please Read Carefully
Legal & Safety Information
Thank you for your purchase of the iBCam Securipro SP6 Smart HD WiFi Monitor.
Every effort has been made to ensure this product meets high safety and standards
although it must be setup and used correctly.
Please read the following information to help ensure the product remains safe to use:
The product is multipurpose (e.g. security monitoring, pet monitoring etc.) although has
certain features which can be especially helpful in specific scenarios e.g. baby/child
monitoring. As such, where it is used as a parenting aid, you should check on your
baby/child as regularly as is required as it should not be used to replace adult
supervision.
If your baby/child has special medical needs and uses monitoring equipment for such
needs, this product should not be used in its place.
Always ensure that any cables attached to this product are out of reach of your
baby/child at all times.
Other precautions and warnings:
• Do not place in high humidity environments (e.g. Showers or outdoors)
• Keep away from liquids
• Do not disassemble
• Has small parts which could be a potential choking hazard
• The product and its infrared LED lights get warm during use. Use only in a well
ventilated area and do not cover the product to prevent creating a fire hazard
• Make sure the product is properly mounted before use
• Keep out of reach of direct sunlight and reflections as this may damage the lens
Box contents
You should find the following items inside the contents box of the product:
Hardware Setup
1.0 From the product box, find and attach the WiFi Antenna to
the rear of the monitor. This should be done by gently screwing
clockwise until a firm fit is achieved. The WiFi Antenna can be
gently rotated until it is pointing upwards (towards the sky).
1.1 If you want to mount your iBCam on a wall (ideal for maximum viewing angles), find
the wall mounting hardware kit in the product box (Wall Mounting Bracket & Screw Kit)
and have a competent person install this. Otherwise, if you just want to sit the SP6
Monitor on a flat surface, continue to the next step.
DOCVER 2.00
1.2 Locate the Power Adapter, the USB Cable and Temperature & Humidity Sensor in
your product box. Connect one side of the USB Cable to the Temperature & Humidity
Sensor and then connect the other side to the Power Adapter. Connect the Temperature
& Humidity Sensor to the SP6 Monitor and the Power Adapter to a Mains Socket.
Download the App
2.0 The App needed for the SP6 Monitor can be downloaded from Apple App Store (for
iOS devices e.g. iPhone, iPad) or Google Play Store (for Android devices) and is called:
‘Securipro SP6’
Connection Types
3.0 Although the device is WiFi Capable (2.4GHz WiFi Routers only), for best results, a
wired Network Cable connection is always recommended for a faster, smoother and
more secure connection due to it not being as susceptible to interference as WiFi can be.
3.1 WiFi - If using a WiFi connection, your router should ideally be in a room above
where the SP6 Monitor will be used and within 20 feet of it (this may be affected by walls
and other electrical interference).
3.2 Network Cable - If using a Network Cable connection, you may use the short one
supplied. Alternatively, longer lengths of Network Cable can be bought from most good
computer outlets. There are also many helpful low cost alternatives that can create a fast
and neat wired equivalent solution without wires running around the building e.g.
Powerline Plugs that use your mains power supply for the network signal (sold at most
good computer outlets or contact your retailer for further information).
1
2 3

ibcam SP6 Specifications

General

Resolution	1920x1080
Frame Rate	30fps
Two-Way Audio	Yes
Motion Detection	Yes
Storage	MicroSD card (up to 128GB)
Connectivity	Wi-Fi
Input Ports	USB

Summary

Legal & Safety Information

Health and Environmental Precautions

Groups warnings regarding usage in high humidity, liquids, small parts, heat, and direct sunlight.

Box Contents

List of Included Items

Summarizes all physical components provided in the product box, including monitor, cables, and accessories.

Download the App

App Installation Guide

Instructions on where to find and download the necessary 'Securipro SP6' mobile application for iOS and Android.

Hardware Setup

Initial Device Configuration

Steps for attaching the WiFi antenna, mounting the device, and connecting power and sensor components.

Connection Types

Network Connection Options

Details on recommended wired network cable vs. WiFi connections for optimal performance and reliability.

WiFi Setup Methods

Method 1: App Setup

Step-by-step guide for configuring WiFi via the mobile application, including password entry.

Method 2: WPS Button Setup

Procedure for connecting the monitor using the router's WPS (Wi-Fi Protected Setup) function.

Method 3: Direct WiFi Connection

Instructions for connecting directly to the monitor's temporary WiFi network to initiate setup.

Method 4: Web Interface Setup

Advanced method for WiFi configuration using the monitor's web interface via a network cable.

Network Cable Setup

Wired Connection Procedure

Steps for physically connecting the monitor via a network cable to the router for optimal performance.

Adding Additional Smart Devices

Multi-Device Pairing

Instructions on how to connect more phones or tablets to the iBCam monitor via the Securipro SP6 app.

Security Best Practices

Password Management and Network Security

Guidance on changing default passwords for the app and web interface, and securing the connection.

Using the Memory Card

Event Recording Setup

Instructions on how to insert and use a memory card for storing event footage triggered by alerts.

Troubleshooting Common Issues

Resolving Performance and Connection Problems

Solutions for issues like poor video quality, lost passwords, monitor overheating, and setup failures.

Support and Contact Information

Getting Help and Further Assistance

Details on where to find online support updates and customer service contact email addresses.

Warranty Information

Product Guarantee and Liability

Explanation of the 12-month warranty period, return procedures, proof of purchase, and liability limitations.