Need help?Do you have a question about the iBell Tools IBL ID 13-80 and is the answer not in the manual?
General| Model | IBL ID 13-80 |
|---|---|
| Category | Drill |
| Drill Type | Impact Drill |
| Power Source | Corded Electric |
| Voltage | 230V |
| No Load Speed | 0-2800 RPM |
| Chuck Size | 13mm |
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Precautions regarding power tool plugs, outlets, and protection against electric shock.
Personal protective equipment and safe operating practices to prevent injury.
Instructions for maintaining and servicing the power tool by qualified personnel.
Guidelines for proper use, handling, and maintenance of power tools.
Potential risks of injury and damage that remain even with correct usage.
Explanation of symbols and abbreviations used in the manual and on the product.
Identification and description of major parts of the impact drill.
Details on voltage, power, speed, weight, and drilling capacity.
List of included accessories for IBL ID13-80 and TD13-100 models.
Instructions for unpacking, checking contents, and preparing for assembly.
Defines the product's purpose and limitations, including drilling capacities.
Procedure for inserting and removing drill bits for various applications.
How to change the rotational direction (forward, reverse, lock).
Operation of the trigger switch for turning the device on/off and speed control.
How to switch between two working modes affecting speed, power, and torque.
Adjusting the mode operation between hammering and drilling.
How to use the lock-on button for continuous operation.
Instructions for mounting and using the auxiliary handle for stability.
Procedure for attaching and setting the depth gauge for precise drilling.
Detailed steps and tips for drilling and hammering operations.
To Next Page
