Need help?Do you have a question about the iBell Tools IBL TD13-100 and is the answer not in the manual?
General| Model | IBL TD13-100 |
|---|---|
| Category | Drill |
| Type | Impact Drill |
| Power Source | Corded Electric |
| Power | 650 W |
| Voltage | 220V |
| Frequency | 50 Hz |
| No Load Speed | 0-2800 RPM |
| Chuck Size | 13 mm |
| Weight | 1.8 kg |
Maintain a clean, well-lit work area and ensure proper electrical connections and cord care.
Stay alert, wear appropriate PPE, prevent unintentional starts, and maintain proper footing.
Proper tool operation, maintenance, and awareness of potential hazards during use.
Covers noise, auxiliary handle, gripping, securing workpiece, and positioning for safe operation.
Safe practices for inserting, removing, and using drill bits, including checking their condition.
Warnings on carrying the tool, removing keys, and understanding safety symbols.
Identification and description of the main parts of the impact drill.
Technical details of the tool and a list of included accessories.
Procedures for unpacking the tool and verifying all necessary components are present.
Defines the product's applications and limitations for safe and effective operation.
Step-by-step instructions for safely attaching and detaching drill and driver bits.
How to change the direction of the drill bit rotation for different tasks.
Operating the trigger for power and adjusting drilling speed.
Switching between two speed gears and drilling/hammering modes.
Enabling continuous operation without needing to hold the trigger.
Proper attachment and use of the auxiliary handle for enhanced control.
Setting and attaching the depth gauge for precise drilling depth.
Best practices for holding, positioning the tool, and performing drilling operations.
Instructions for cleaning the tool after use and storing it safely.
Guidance on bit inspection and referring to professionals for repairs.
Diagnosing and resolving issues related to the tool failing to power on.
Troubleshooting poor performance or incorrect operation of the drill.
Identifying causes for the tool stopping unexpectedly during use.
To Next Page
