©Copyright LOTRONIC 2018 LC192DMX-MINI 7
5. Press MIDI/ADD button to copy. All LEDs will blink to confirm
3.4.5 Edit Chase (Copy a Scene into a Chase)
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Select the Bank that contains the Scene to be copied using the BANK UP/DOWN buttons
4. Select the SCENE to be copied
5. Press MIDI/ADD button to copy. All LEDs will blink to confirm
3.4.6 Edit Chase (Insert Scene into Chase)
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press the TAP/DISPLAY button to switch the display to step view
4. Use BANK UP/DOWN buttons to navigate each scene in the chase until the insert point is reached
5. Press MIDI/ADD button to prepare the insert
6. Use BANK UP/DOWN buttons to navigate to the scene to be inserted
7. Press MIDI/ADD button to insert. All LEDs will blink to confirm
3.4.7 Delete a Scene from a Chase
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press the TAP/DISPLAY button to switch the display to step view
4. Use BANK UP/DOWN buttons to navigate to the Scene to be deleted
5. Press AUTO/DEL button to delete. All LEDs will blink to confirm
3.4.8 Delete a Chase
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press and hold the AUTO/DEL button and the CHASE button to delete. All LEDs will blink to confirm
3.4.9 Delete all Chase Programs
Action:
1. Turn the FIXTURE power OFF
2. Press and hold the BANK DOWN and AUTO/DEL buttons together and switch the power back on
3. All LEDs will blink to confirm Chases have been deleted
3.5
Scene Programming (Steps)
3.5.1 Insert a Scene
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press the TAP/DISPLAY button to switch the display to step view
4. Use BANK UP/DOWN buttons to navigate to the point at which to insert a Scene
5. Press the MIDI/ADD button to prepare to insert a scene
6. Use BANK UP/DOWN buttons to navigate to the scene that is to be inserted
7. Press the SCENE button that corresponds to the scene to be copied
8. Press the MIDI/ADD button to insert the scene. All LEDs will blink to confirm
Note: To insert a scene between Steps 05 and 06 navigate using BANK buttons until the LCD reads STEP05.
3.5.2 Copy a Scene
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to navigate to the bank containing the Scene to be copied
To Next Page
Loading...
Need help?
General