Need help?Do you have a question about the Ibiza LEDBAR24-RC and is the answer not in the manual?
Manual introduction, product name, and available language versions of the guide.
Defines symbols and provides crucial safety warnings, and important instructions for product use.
Instructions for fixture setup, fuse replacement, and connecting multiple fixtures for synchronized shows.
Guidance on DMX connector configuration, signal terminators, and setting up serial data links.
Steps for connecting fixtures in a master/slave configuration for synchronized operation.
Overview of the four panel buttons (MENU, UP, DOWN, ENTER) and their functions.
How to set DMX addresses, channel modes, master-slave, sound control, and auto effects via the display.
Instructions for using the IR remote, installing batteries, and recommendations for battery care.
How to switch the unit on/off and select different auto programs using the remote.
Instructions for selecting sound-controlled modes, adjusting speed, and using strobe effects.
Guidelines for cleaning optics and a list of the product's technical specifications.
Detailed functions for DMX channels in 6, 9, 16, and 30-channel modes.
Continues DMX channel functions for 30-channel mode and starts 58-channel mode.
Details remaining DMX channel functions for the 58-channel mode.
Provides the full list of DMX channel functions for the 58-channel configuration.
Defines the value ranges for Color Chase effects and Sound Active modes.
General| Type | LED Bar |
|---|---|
| Model | LEDBAR24-RC |
| Number of LEDs | 24 |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 30W |
| Material | Aluminum |
| Protection Class | IP20 |
| Beam angle | 25° |
| Control | DMX, Remote Control |
To Next Page
