15. After the printer warms up, the READY message displays on the operator panel.
Note: If message display area shows solid rectangles, make sure the I/O cable is
attached firmly to both the 2000-sheet input drawer and the options controller card.
Also make sure the I/O cable connectors are plugged into the appropriate
connector.
Important
To confirm that you have correctly installed the 2000-sheet input drawer, print a
configuration page. The report should show 2000-sheet input drawer (Tray 3)
installed. See “Example 1 — Printing the Printer Configuration Page” on page 32.
Chapter 7. Installing Printer Options 179
To Next Page
Loading...
