Need help?Do you have a question about the IBM 24 and is the answer not in the manual?
Provides a quick reference to common tasks for printer setup and operation.
Details on the printer's physical characteristics, performance, and supported features.
Lists and describes optional hardware components that can be added to enhance printer functionality.
Information on how to order consumable items like toner cartridges and usage kits.
Explains how printer drivers enable users to select functions and override operator panel settings.
Instructions on how to download updated printer drivers from the web.
Details the function of each key on the printer's operator panel for configuration and operation.
Illustrates how to navigate through the printer's action and configuration menus using examples.
Guides on common tasks like canceling jobs, selecting duplex binding, and printing font lists.
Lists and explains common messages displayed on the operator panel for status and errors.
Allows printing configuration, font lists, test pages, and resetting printer to factory defaults.
Enables selection of input trays, output bins, paper sizes, and duplex printing options.
Defines printer settings for paper jams, error conditions, toner density, and power savings.
Displays printer supply usage information, including page counts and error logs.
Details supported media types, weights, and duplex capabilities for various input/output options.
Provides instructions on how to load paper into different trays, the auxiliary tray, and the envelope feeder.
Step-by-step guide for loading up to 2000 sheets of paper into the optional input drawer.
Instructions for properly loading envelopes into the optional envelope feeder to prevent jams.
Describes basic tasks like setting default input trays, output bins, and paper sizes.
Lists paper jam error messages and the corresponding tasks to clear the jams.
Detailed steps for safely removing paper jams from the printer's fuser area.
Instructions for clearing paper jams located in the printer's standard input trays.
Steps for clearing paper jams within the printer's optional duplex printing unit.
Guidance on clearing paper jams in various areas of the optional 2000-sheet finisher.
Procedure for clearing staple jams in the finisher's stapling unit.
Information on how to order and replace consumable items for printer maintenance.
Step-by-step instructions for safely replacing the printer's toner cartridge.
Guidelines for cleaning the printer's exterior covers and electronic components.
Instructions for replacing the staple cartridge in the 2000-sheet finisher.
Precautions to take when handling electronic components like hard drives and SIMMs.
Details the locations for installing SIMMs and hard drive options on the printer controller card.
Step-by-step guide for installing Single Inline Memory Modules (SIMMs) into the printer.
Procedure for installing a hard drive onto the printer controller card for additional storage.
Instructions for installing the options controller card to manage printer features.
Procedure for installing network interface cards for printer connectivity.
Steps for attaching the optional envelope feeder to the printer.
Guide for installing the optional duplex unit for two-sided printing.
Instructions for installing the optional 2000-sheet input drawer to increase paper capacity.
Steps for unpacking and attaching the optional 2000-sheet finisher to the printer.
Explains methods for downloading and storing fonts on the printer's memory or hard drive.
Provides minimum memory requirements based on print job type, paper size, and duplexing.
Basic tasks required to install and configure the printer for network operation.
Procedure for setting the printer's IP, subnet mask, and gateway addresses via the operator panel.
Instructions for changing the printer's MAC address for Token Ring network configurations.
Locates symptoms and provides suggested actions to solve common printer issues.
Addresses issues where printed output appears too light, suggesting quality and density adjustments.
Explains how to resolve print quality issues related to toner spots on the printed page.
Guidance on fixing print quality problems like random deletions or light areas.
Troubleshooting steps for vertical marks appearing on the printed output.
Addresses issues where the entire print output is black, suggesting toner cartridge checks.
Troubleshooting steps for when the entire print output is blank, checking toner and paper feed.
Solutions for print quality issues where the printed image rubs off or smears.
Steps to prepare for installing the usage kit, including identifying parts and tools.
Procedure for replacing the auxiliary feed pick-up roller and separation pad.
Step-by-step guide for replacing the printer's fuser assembly.
Instructions for replacing the transfer charging roller assembly.
Procedure for replacing pick-up, feed, and separation rollers.
Details the technical specifications of the printer, including printing system and resolution.
Provides specifications for the toner cartridge, including temperature and humidity for storage.
To Next Page
General