Need help?Do you have a question about the IBM InfoPrint 6700 Series and is the answer not in the manual?
How to request service for the printer, including contact information and procedures.
Safety precautions and important information for using the printer and protecting equipment.
Provides step-by-step instructions for unpacking and installing the printer.
Identifies and explains the printer's controls, indicators, and the LCD display.
Steps and expected behavior when powering on the printer for the first time.
Describes the various modes for handling media, such as Continuous, Tear-Off Strip, and Peel-Off.
Instructions for loading different types of media and ribbons into the printer.
Explains how to set printer parameters via the control panel or memory.
Steps for modifying various printer settings like print speed and media handling.
Instructions on how to save printer configurations for future use or as power-up defaults.
Procedures for changing existing saved printer configurations.
Steps to load a previously saved printer configuration.
Explains the Auto Switching feature for handling multiple data streams sequentially.
Details the Centronics parallel interface, including pin assignments and signals.
Explains the IEEE 1284 interface, its modes, and signals.
Describes the RS-232 and RS-422 serial interfaces and their characteristics.
Guides on using printer tests to check operation and print quality.
Lists common printer problems and their potential solutions.
Factors affecting print quality and how to adjust them.
Methods to identify and diagnose printhead wear.
Step-by-step instructions for safely replacing the printhead assembly.
Explains different fault messages and how to correct them.
Detailed instructions for physically installing the heavy-duty media cutter.
To Next Page
General
