IBM InfoPrint 6700 Series User Manual

CONFIG. CONTROL Submenus
125
MEDIA CONTROL
Notes:
* = Factory Default
Italicized items are available when Admin User is set to Enable (in the PRINTER CONTROL menu).
1
Maximum value depends on the width of the printer model and printhead.
2
You can change the unit value from inches to millimeters under Units (in MEDIA CONTROL) when Admin User is
enabled.
3
Based on the current value setting for Label Length (in MEDIA CONTROL) up to a maximum of 12.80 inches.
4
Maximum value depends on the width of the printer model (see Appendix A, “Specifications”).
5
Maximum value depends on model width and size of DRAM installed (see Appendix A, “Specifications”).
MEDIA CONTROL
Print Intensity
6 ips* 1-10 ips
1
Tear-Off Strip* Tear-Off Peel-Off Cut
Print Speed
Print Mode
Media Handling
Paper Feed Shift
Label Width
Label Length
Ver Image Shift
Hor Image Shift
Orientation
Auto Label Width
Num Auto Labels
Slew Speed
Transfer* Direct
4.1, 6.6, or 8.5 inches*
2, 4
Portrait* Landscape Inv. Portrait Inv. Landscape
2 labels* 1 to 40 labels
4
00.1 to 8.5 inches
4
4.1, 6.6, or 8.5 inches*
2, 4
Continued at the top of next page
-3* -15 to 15
0.00 inches*
2
-1.00 to 1.00 inches 0.00 inches*
2
-1.00 to X inches
3
00.1 to 8.5 inches
4
0.00 inches*
2
4 or 6 inches*
2, 4
00.1 to 99.0 inches
5
-0.50 to X inches
3
ManualAutomatic*
Continuous
Auto Map Select
Disable* Enable
MEDIA CONTROL

IBM InfoPrint 6700 Series Specifications

General

Brand	IBM
Model	InfoPrint 6700 Series
Category	Printer
Language	English