Overview
239
Set Text Orientn (Coax, Twinax)
(From page 168, page 171.) Specifies the direction in which characters are
printed on the page. This allows the printer to print languages which are
printed right to left instead of left to right.
• Control By Host (the default). Allows printers configured as a 4234 to
use the “Set Text Orientation” command from the host.
• Left to Right.
• Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
Set Text Orientn (TN3270, TN5250)
(From page 180, page 182.) Specifies the direction in which characters are
printed on the page. This allows the printer to print languages which are
printed right to left instead of left to right.
• Left to Right (the default).
• Right to Left. When you select a right to left language, the host will be
notified of print direction changes when the printer is put online.
SFCC (IGP/VGL)
(From page 187.) This option selects the Special Function Control Code. The
default value is the caret ^ (decimal 94). Valid values are 17 through 255. Run
a configuration printout to determine the currently selected SFCC.
The range is 17-255, and the factory default is 94.
SFCC Char (SPC Coax, SPC Twinax)
(From page 173, page 174.) Determines what character is printed when an
EBCDIC Logical Not character ¬ (Hex 5F) is received from the host.
• Set 1 <%>* (the default).
• Set 2 ^^$
• Set 3 _%_
• User Defined
SFCC d command
(From page 191.) This menu option is for backward compatibility.
• Even dot plot (the default). This option interprets the SFCC d command
as even dot plot.
• Double high. This option interprets the SFCC d command as double
high. Select this option for backward compatibility.
Emulation Submenus
To Next Page
Loading...
Need help?
General
