Overview
213
Copy Count
(From page 187.) Determines the number of identical copies of each physical
page that will be printed.
The range is 1-999, and the factory default is 1.
CR at MPP+1
(From page 167, page 179.) MPP is Maximum Print Position, which is also
known as line length. This option controls a carriage return at the end of a
print line and at MPP+1.
• On. Produces a carriage return to the first print position of the next line.
• Off. Produces a carriage return to the first print position of the current line.
The factory default is On.
CR Edit
(From page 184.) This parameter determines if a carriage return will be
followed by a line feed.
• Disable. The printer ignores all carriage returns that are not followed by
line feeds.
• Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.
The factory default is Disable.
CR, EM, & NL
(From page 168, page 180.) CR (Carriage Return), EM (Error Message), &
NL (New Line) specify that the printer treat the CR, EM, and NL control codes
either as spaces or as control codes.
• On. Treats the CR, EM, and NL commands as control codes.
• Off. Treats the CR, EM, and NL commands as spaces.
The factory default is On.
Emulation Submenus
To Next Page
Loading...
Need help?
General
