Overview
203
Alt. Set 80-9F (Coax, Twinax, TN3270, TN5250)
(From page 167, page 170, page 179, page 182.)
• Printable. Prints data in the range of hex 80 through hex 9F.
• Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
The factory default is Printable.
Append Rotated
(From page 187.)
• Disable. Logos and alphanumeric strings are treated as separate
elements.
• Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
The factory default is Disable.
Auto FF at ^PN
(From page 188.) When enabled, an FF will be generated automatically to
slew to the end of form when the ^PN command is encountered and when the
current vertical position is not at the top-of-form.
The options are Disable (the factory default) and Enable.
Auto LF (P-Series, P-Series XQ)
(From page 191, page 193.) This option defines the printer action when print
data is received past the forms width setting.
• Disable. Discards any data past the forms width.
• Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
The factory default is Disable.
Auto LF (Serial Matrix, Proprinter XL, Epson FX)
(From page 196, page 198, page 200.) This option defines the printer action
when print data is received past the forms width setting.
• Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
• Disable. Discards any data past the forms width.
The factory default is Enable.
Emulation Submenus
To Next Page
Loading...
Need help?
General
