1. 2000-sheet finisher
Base unit; output trays not installed
2. Stapler cartridge
2000-staple cartridge; pre-installed at factory. (If not, instructions are provided in
“Installing a Staple Cartridge” on page 191.)
3. Output trays (3)
There are three output trays
4. Caution sheet, R-IM-326
Review for safety information
5. Screws (7)
There are seven screws which are used to attach the output trays and guide rail to
the 2000-sheet finisher and printer.
6. Input/output cable
Used to attach the 2000-sheet finisher to the 2000-sheet input drawer.
7. Guide rail
Attaches the 2000-sheet finisher to the printer to provide support.
8. Printer delivery slot adapter
Attaches to printer to help guide paper into the 2000-sheet finisher.
9. Ground adapter
Attaches to printer to reduce electrostatic discharge.
10. Cord holder
Holds I/O cable in place.
11. Installation instructions
Provides information on unpacking and attaching 2000-sheet finisher to the printer.
12. Power cord connector
Provides connector for the power cord.
182 User's Guide
To Next Page
Loading...
