EasyManua.ls Logo

IBM 24

IBM 24
322 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38.3 FINISHER JAM
Meaning: A paper jam occurred within the 2000-Sheet Finisher as paper was
being stapled.
Action: Check the output bins for a paper jam. If no paper jam is visible, open the
upper paper access cover (top cover) and check for a paper jam. For more
information, see “Locating Paper Jams” on page 115.
38.4 FINISHER JAM
Meaning: A paper jam occurred within the 2000-Sheet Finisher as paper was
being stapled.
Action: Check the output bins for a paper jam. If no paper jam is visible, open the
upper paper access cover (top cover) and check for a paper jam. For more
information, see “Locating Paper Jams” on page 115.
40 MEMORY OPTION ERROR
Meaning: A SIMM module is not properly seated in its slot or is in some other way
defective.
Action: Turn off the printer. Reseat the SIMM module (see “Installing a SIMM” on
page 155). If the message recurs after you restart the printer, call for service.
41 NETWORK OPTION ERROR
Meaning: The printer detected a network interface card, but the card is not
communicating.
Action: Make sure the network card in slot 1 is properly installed and restart the
printer. See “Installing a Network Interface Card” on page 166. If the message
recurs, call for service.
42 NETWORK OPTION ERROR
Meaning: The printer detected a network interface card, but the card is not
communicating.
Action: Make sure the network card in slot 2 is properly installed and restart the
printer. See “Installing a Network Interface Card” on page 166. If the message
recurs, call for service.
43 PS OPTION ERROR
Meaning: The printer has detected a problem in the PostScript module.
Action: Reinstall the PostScript SIMM. See “Installing a SIMM” on page 155. If
the message recurs, call for service.
44 IPDS OPTION ERROR
Meaning: The printer has detected a problem in the IPDS module.
Action: Reinstall the IPDS SIMM. See “Installing a SIMM” on page 155. If the
message recurs, call for service.
46 NETWORK OPTION ERROR
Meaning: The printer has detected that two of the same network cards have been
installed.
Action: Remove one of the cards.
Appendix B. Understanding Printer Messages 229

Related product manuals