IBM 24

COAX SETUP
MENU ITEM
VALUE Description
EARLY COMPL ON*
OFF
Turns early print completion on or off for non-IPDS data sent over
the coax attachment. To turn early print completion on or off for
IPDS data, use the EARLY COMPL item on the IPDS Menu.
 ON—sends an “order complete” as soon as data is received.
 OFF—waits until the print job is physically complete to send
“order complete.”
PA1 none Selecting this value and pressing the Enter key sends a PA1
signal to the host.
Note: This applies to SCS only; not DSC/DSE or IPDS.
PA2 none Selecting this value and pressing the Enter key sends a PA2
signal to the host.
Note: This applies to SCS only; not DSC/DSE or IPDS.
70 User's Guide