4. Move
your
keyboard and all external options away from
the
work area.
5. Position the system unit
to
allow access
to
the
rear.
6. Using a flat-blade screwdriver
or
a 1/4-inch nutdriver,
remove the cover
mounting
screws by turning
them
counterclockwise
as
shown in the figure below. Save
the screws for the installation
of
the cover.
Cover Mounting Screws
(These three screws may not be
present
on
your
system unit)
APA
Adapter
3
To Next Page
Loading...
Need help?
General
